Star Headlight & Lantern LDHT36 Series Manual

Par 36 hazard/turn signal led lights

Advertisement

Quick Links

PAR 36 Hazard/Turn Signal LED Lights
LDHT362-T-*
Please read all of the following instructions before installing your new light.
Failure to follow these safety precautions may result in damage to your light or
vehicle and may result in serious injury or death to you and your passengers.
These lights are NOT designed to replace the standard Turn Signals or Hazard lights on your vehicle.
These lights, when activated via a user-supplied switch, will flash in a pre-programmed warning pattern
that is selected at the time of installation.
If these lights are powered up, and a Turn Signal (blinker) is activated, the corresponding light will
mimic the flashing of the Turn Signal. The opposite light will either remain in the warning pattern
mode, deactivate (turn OFF), or become Steady Burn, depending upon initial programming of your
lights at the time of installation.
These lights are NOT designed to act as STOP or Brake lights.

LED FIVE YEAR LIMITED WARRANTY

The manufacturer warrants this LED light against factory defects in material and workmanship for five years
after the date of purchase. The owner will be responsible for returning to the Service Center any defective
item(s) with the transportation costs prepaid. The manufacturer will, without charge, repair or replace at its
option, products, or part(s), which its inspection determines to be defective. Repaired or replacement
item(s) will be returned to the purchaser with transportation costs prepaid from the service point. A copy of
the purchaser's receipt must be returned with the defective item(s) in order to qualify for the warranty
coverage.
Exclusions from this warranty include, but are not limited to, domes, and/or the finish.
warranty shall not apply to any light, which has been altered, such that in the manufacturer's judgment, the
performance or reliability has been affected, or if any damage has resulted from abnormal use or service.
There are no warranties expressed or implied (including any warranty of merchantability or fitness), which
extend this warranty period. The loss of use of the product, loss of time, inconvenience, commercial loss or
consequential damages, including costs of any labor, are not covered. The manufacturer reserves the right
to change the design of the product without assuming any obligation to modify any product previously
manufactured.
This warranty gives you specific legal rights. You might also have additional rights that may vary from state to
state. Some states do not allow limitations on how long an implied warranty lasts. Some states do not allow
the exclusion or limitation of incidental or consequential damages. Therefore, the above limitation(s) or
exclusion(s) may not apply to you.
LDHT36 Series
LDHT363-T-*

LDHT36 Functionality

LDHT364-T-*
This
PLIT477 REV. B
2/15/13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LDHT36 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Star Headlight & Lantern LDHT36 Series

  • Page 1 LDHT36 Series PAR 36 Hazard/Turn Signal LED Lights LDHT362-T-* LDHT363-T-* LDHT364-T-* Please read all of the following instructions before installing your new light. Failure to follow these safety precautions may result in damage to your light or vehicle and may result in serious injury or death to you and your passengers.
  • Page 2 NOTICE Due to continuous product improvements, we must reserve the right to change any specifications and information, contained in this manual at any time without notice. Star Headlight & Lantern Co., Inc. makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
  • Page 3 Programming After the lights have been installed, and prior to connecting all of your wires, there are two options you will need to decide upon and program. The options MUST BE PROGRAMMED IN THE PROPER ORDER before use: A. Opposite Light Function - When your lights are activated in Warning Mode and you turn on your Turn Signal (blinker), what do you want the opposite light do: •...
  • Page 4 Wiring When wiring your lights, it is recommended that you take the following precautions to reduce any Electromagnetic Interference (EMI). • Keep LED modules and any radios as far away from each other as possible. • Separate the radio wires and the LED wires. •...

This manual is also suitable for:

Ldht362-t seriesLdht364-t seriesLdht363-t series

Table of Contents