Changing The Tactical Inhibit Password; Radio Stun And Kill; Radio Stun; Using Radio Stun - Motorola APX Series User Manual

6.13.3

Changing the Tactical Inhibit Password

The Tactical Inhibit Password is required for the Radio Stun and Radio Kill features. You can set up to
eight characters for this password.
Procedure:
1 or to PSWD.
2 Press the Menu Select button directly below PSWD.
The display shows Change Password screen.
3 or to TACTICAL INH ENCODE PSWD.
4 Press the Menu Select button directly below SEL .
5 Enter the old password.
6 Press the Menu Select button directly below OK .
7 Enter the new password.
8 Press the Menu Select button directly below OK .
9 Re-enter the new password.
10 Press the Menu Select button directly below OK .
The password is updated.
If the two passwords do not match, repeat
NOTICE: If you enter three incorrect passwords, the radio exits the password feature.
You cannot access this feature again until you turn the radio off and on.
6.14

Radio Stun and Kill

This chapter explains the radio stun and kill features.
6.14.1

Radio Stun

This feature allows you to stun another radio by sending an over-the-air command using the menu on
your radio. This feature prevents an unauthorized user from using the radio. Once the radio is stunned,
a password is required to re-activate the stunned radio.
6.14.1.1

Using Radio Stun

Procedure:
1 or to STUN.
2 Press the Menu Select button directly below STUN.
The display shows ENTER PASSWORD.
3 Use the keypad to enter your Tactical Inhibit Encode Password.
step 5 through step 10.
6875947M01-HM
Advanced Features
79