Registering The Dss7805Wp Compatible Handsets; Resetting The Handsets - Uniden DSS7915 Series Owner's Manual

Registering DSS7805WP Compatible Handsets
) Disconnect the base AC adapter.
2) While holding the [find hs], reconnect the AC adapter until the charge LED starts blinking.
3) On the handset, press and hold [#] until you hear a beep.
4) While the handset is registering, HANDSET REGISTERING will appear in the LCD. When REGISTRATION
COMPLETE is displayed; the handset has been registered to the base. If REGISTRATION FAILED appears,
please try these steps again.

Resetting the Handsets

If you want to register a handset to a different base or replace a handset with another one, you must first clear the
existing registration data. To clear, please follow these steps:
) Press the MENU soft key. Select the DEREGISTER HS submenu.
2) DEREGISTER HS? appears. Move the cursor to select YES. Press the OK soft
key.
Or
) From the handset, press and hold [ ] and [#/>] for more than 5 seconds. You will hear a confirmation tone,
and DEREGISTRATION COMPLETE appears.
After resetting the handset, place the handset to the base to register. You must re-register the handset before you
can use it. (See Registering DSS7905 Accessory Handset section on page 23 for registration instructions.)
24