Terminology Used In This Manual - Uniden DSS7915 Series Owner's Manual

Terminology used in this Manual

The handset is not in use. If the handset is on the cradle or [ /flash] or [ ] is not pressed, no line
Standby
has been activated. No dial tone is present.
Caller ID is available from your Telephone provider and is offered to users on a subscription basis.
CID
With this service and a display on your cordless phone, you will be able to see the incoming caller
information such as name and phone number.
Caller ID with Call Waiting is available by subscription from your Telephone provider. With this ser-
CID/CW or
vice, you will be able to view incoming caller information while on a call with another user. This will
CIDCW
allow you the ability to select to talk to this user and put your existing party on hold or make the
decision to ring them back.
DirectLink If you have accessory handsets on your system, you can use two handsets as 2-way radios.
Accessory This phone system is expandable and will support a total of ten (0) handsets to one base. The
Handsets DSS7905 accessory handset is compatible with this model.
Global Settings apply to all registered handsets. If you change something under the global menu,
Global
you change it for all handsets. Only one handset can change global settings at a time, and you
settings
have to make sure the phone is not currently being used.
Station Any handset or the base.
Talk A telephone line has been activated on the handset or base, enabling a dial tone.
5