Registering.DSS7805WP.Compatible.Handsets
)
Disconnect the base AC adapter.
2)
While holding the [flash/find handset], reconnect the AC adapter until the charge/in use LED starts blinking.
3)
On the handset, press and hold [#] until you hear a beep.
4)
While the handset is registering, HANDSET REGISTERING will appear in the LCD. When REGISTRATION
COMPLETE is displayed; the handset has been registered to the base. If REGISTRATION FAILED appears,
please try these steps again.
Resetting.the.Handsets
If you want to register a handset to a different base or replace a handset with another one, you must first clear the
existing registration data. To clear, please follow these steps:
)
Press the MENU soft key. Select the DEREGISTER HS submenu.
2)
DEREGISTER HS? appears. Move the cursor to select YES. Press the OK soft
key.
Or
)
From the handset, press and hold [ ] and [#/>] for more than 5 seconds. You will hear a confirmation tone,
and DEREGISTRATION COMPLETE appears.
After resetting the handset, place the handset to the base to register. You must re-register the handset before you
can use it.
26