Resetting And Registering Handsets; Registering A Handset - Uniden XDECT 8015 Series Owner's Manual

resetting and registering handsets

If you are having trouble with a handset or if you want to replace one,
you need to clear the registration information from the base and the
handset:
Do you have the base the handset is registered to?
1. Press & hold
System Reset menu appears (about 5
seconds).
2. Select Deregister HS. The display lists
all registered handsets.
3. Select the handset you want to reset.
4. When the phone asks you to confirm,
select Yes. The handset clears its
information from the base & deletes it
own link to the base.
When you reset a handset (or if you buy a new one), that handset
displays a Handset Not Registered message. If you see this message
on a handset, you need to register it to a base before you can use it.

Registering a handset

Place the unregistered handset into the main base for charging to
start the registration process.
If...
-
you don't hear a dial tone
-
the display says
To register a handset to a different base, see the section
"Expanding Your phone" in the user's guide for the other base.
28
Yes
END and # until the
Registration Failed
1. Press & hold
the System Reset menu
appears (about 5 seconds).
2. Select Base Unavailable.
3. When the phone asks you
to confirm, select Yes. The
handset deletes its own link
without contacting the base.
Try...
Making sure the handset is fully
charged, then start over.
No
END and # until