Registering The Handset; Resetting The Handset - Uniden DECT 6015 Owner's Manual

Registering the Handset

You must register the handset to the base before you can use it.
Only one handset can be registered at a time. (If an accessory
handset has ever been registered to a base, you must reset the
handset before you can register it to a new base.)
To register to a DECT 6000
series base, place the
accessory handset in the base.
While the handset is registering,
HANDSET REGISTERING
appears in the LCD. When
REGISTRATION COMPLETE is
displayed, the handset has been
registered to the base.
If REGISTRATION FAILED
appears, pick up the handset
from the base and try again.

Resetting the Handset

If you want to register the handset to a different base or replace
a handset with another one, you must fi rst clear the registration
information from the base and the handset.
1. Press and hold [ ] and [#] for at least fi ve seconds, until the
SYSTEM RESET menu appears.
2. Select the DEREGISTER HS
submenu by pressing [Menu/Select].
WHICH HANDSET? appears in the
display.
3. Use [
from the list, and then press [Menu/Select]. DEREGISTER
HS appears.
4. Press [
[Menu/Select]. You will hear a confi rmation tone.
DECT6005 OM.indd 4 DECT6005 OM.indd 4
] or [ ] to select the handset ID to be de-registered
] to move the cursor to YES, and then press
1 1
Extra Handset Extra Handset
Charger Charger
2 2
Extra Handset Extra Handset
Place the extra handset Place the extra handset
in the main base to in the main base to
register. register.
R e g i s t r a t i o n R e g i s t r a t i o n
C o m p l e t e . C o m p l e t e .
B a s e B a s e # 1 # 1
Extra Handset Extra Handset
+ +
3 3 Main Base Main Base
W h i c h H a n d s e t ? W h i c h H a n d s e t ?
H a n d s e t H a n d s e t
H a n d s e t H a n d s e t
4
Charge the handset Charge the handset
for 15-20 hours. for 15-20 hours.
Main Base Main Base
4 4
Charger Charger
# 1 # 1
# 2 # 2
20/8/07 1:49:20 PM 20/8/07 1:49:20 PM