Table of Contents
Advertisement
TRUC46_OM_B6
5/30/02
5:57 PM
Expanding Your Phone
Your phone supports up to 2 handsets (the original handset and the second handset). You
can now place a fully featured cordless handset anywhere AC power is available to connect
the handset charger. Additionally, you can transfer an outside call to another handset.
• We refer to the TXC400 handset as the second handset, and the TRUC46 handset as the original
handset in this section.
• Before use, you need to charge the battery pack for at least 15-20 hours, and for the TXC400
handset, register the handset.
Registering the Second Handset
You need to register the second handset before using. To register the second
handset, do the following steps.
1) Unplug the AC adapter of the TRUC46.
2) Press and hold
PAGE
status LED on the base flashes.
3) Press
on the TXC400's handset. "
TALK/FLASH
When the operation is finished, you will hear a confirmation tone and
"
Registration Complete
• If the registration fails, "
• You must complete the registration operation within 30 seconds, or the phone returns to the
standby mode.
If you changed the digital security code of the TRUC46:
You need to perform the following steps:
1) De-register the digital security code of the TXC400. (For instructions, see "Change the
Digital Security Code" in the owner's manual supplied with the original unit.
2) Register the TXC400 to the original base by following the steps above.
Page 41
on the TRUC46 base, while you plug in the AC Adapter, until the
Handset Registering
" will appear. The status LED is no longer illuminated.
Registration Failed
" appears. Register the TXC400 again.
" appears.
E X PA N D I N G Y O U R P H O N E
[ 41 ]
Advertisement
Table of Contents
