Accessing Voicemail - Uniden DECT 6015 Owner's Manual

Accessing Voicemail

If your base doesn't have an answering system and you
subscribe to a voice mail service, you can program your handset
to automatically dial the access number.
1. Press [Menu/Select].
2. Move the cursor to HANDSET SETUP and press
[Menu/Select].
3. Move the cursor to EDIT VOICE MAIL and press [Menu/
Select].
4. Enter your access number (up to twenty digits). If you need
the phone to wait before sending the next digits, press
[Redial/Pause] to insert a two-second pause. For a longer
pause, press [Redial/Pause] multiple times. Each pause
counts as one digit.
5. Press [Menu/Select] when you are fi nished.
Once you program your access number, press [
your voice mail service.
Accessing Your Answering System
If your base has an answering system, you can use your handset
to get your messages and change your answering system setup.
You have the following options:
Play
messages
Repeat a
message
Skip a
message
Delete a
message
Exit and
hang up
DECT6005 OM.indd 15 DECT6005 OM.indd 15
Press [ /Mute]. The system announces the number of
new and old messages and plays the message.
Press [ ] to go to the start of the current message.
Press [ ] repeatedly to go back to a previous
message.
Press [ ] to go to the beginning of the next message.
While a message is playing, press [
The message is permanently deleted.
Press [ ] to exit the system and return to standby.
15
/Mute] to dial
].
20/8/07 1:49:25 PM 20/8/07 1:49:25 PM