Close Port; Exit The Icom Tools Utility; Messages On Status Bar And Message Logo Area - Advantech PCI Series User Manual

The columns in the Performance panels are explained briefly as follows:
Port
Rx Length
(Bytes/Sec.)
Last Abnormal Status
Stop the Test
To stop the test on a specific port, press the Port Stop button
click Stop on the Port menu. To stop the test on all ports, press the All Ports Stop
button on the toolbar or click Stop on the All Ports menu. You can restart the test
by pressing the Run button
run all ports at once, press the All Ports Run button
on the All Ports menu.
4.4.3

Close Port

If you want to close a port, go to the tab for the com port you wish to close and press
the Port Close button
4.4.4

Exit the ICOM Tools Utility

To exit the ICOM Tools utility, click Exit on the Port menu or press the Close button.
4.5 Status Bar and Message Logo Panel Messages
Messages appearing in the Status Bar and Message Logo panels give specific
information on your system settings and performance.
COM port number
Received packet length (in bytes)
Transmission rate
Last abnormal status
on the toolbar or by clicking Run on the Port menu. To
or click Close on the Port menu.
33
on the toolbar or
on the toolbar or click Run
PCI Communication User Manual