Customer Service - Dicota Hover User Manual

How to connect the mouse pad & mouse?
1. Connect the mouse pad's USB cable to your computer USB port.
2. Place the mouse on the center of the mouse pad, and do not move the
mouse. The PWR LED light should now remain lit.
3. Press the "TUNE" button.
4. PWR LED turns "OFF" and the RUN LED light starts "Blinking".
5. When the tuning process is complete, the PWR and RUN LED will
return to their original mode.
Note!
1. Do not use this product on any metal table or surface. The metal
surface may interface with the cross induction frequency and have
an adverse effect on the mouse operation.
2. Don't keep credit card, ATM magnetic stripe card close to
RFID mouse-pad in order to prevent card from losing efficien-
cy.
3. Keep working temperature at 0 °C – 50 °C.
4. Frequency: 119 KHz –135 KHz

Customer Service:

If you encounter any problem with your Hover, please contact our local
subsidiary, partner or dealer, or send us your inquiry to info@
dicota.com.
2 years warranty. Please find the complete text in our guarantee on
the internet: www.dicota.com.
All the products and software mentioned above are registered trade-
marks of their respective owners. Errors excepted.
4