Busy Channel Lockout; Roger Beep; Key Beep - Uniden uh049sx-2 Owner's Manual

UNIDEN Model uh049sx UHF CB Radio
OPERATION

BUSY CHANNEL LOCKOUT

BCL is used when CTCSS or DCS is selected to prevent transmission when the
uh049sx detects a transmission from another unit using the same CTCSS or DCS
code.
1.
2.
3.

ROGER BEEP

Roger Beep is a BEEP that is sent to notify the end of transmission (both PTT and
VOX transmission.) Roger Beep can be heard through the speaker when Key Beep
is on. Roger Beep is transmitted even if Key Beep is turned off.
However, Roger Beep will not be heard from the speaker.
1.
2.
3.

KEY BEEP

Assures the user that the keypad has been properly pressed by emitting a beep
tone. This tone can be switched on or off.
1.
2.
3.
uh049sx OM.indd Sec1:22 uh049sx OM.indd Sec1:22
MENU
Press eight times. The current BCL setting flashes.
ENT
Press or to select desired setting.
Press and hold MENU to save and exit.
ENT
MENU
Press nine times. The current Roger Beep setting flashes.
ENT
Press or to select desired setting.
Press and hold to save and exit.
MENU
ENT
MENU
Press ten times. bP setting flashes.
ENT
Press or to change selection.
Press and hold to save and exit.
MENU
ENT
22
17/8/07 3:01:12 PM 17/8/07 3:01:12 PM