SELECTING CHANNEL
Press [ ] or [ ] to select the desired channel.
Note:
If you press and hold the [ ] or [ ],
channel numbers will scroll rapidly.
TO TRANSMIT AND RECEIVE
The UH-040XR uses the 40 UHF-CB Channels. For your reference a list of the
available channels and corresponding frequencies is printed at the end of this
manual.
1. The maximum RF transmit power of UH-040XR is 500 mWatts.
2. Before you transmit, listen for
activity on the selected channel.
3. When the channel is clear, press and
hold the
[PTT]
appears on the LCD.
Hold the radio with microphone approximately two inches in front of your mouth
with the antenna at approximately 45˚ angle away from your head. Speak in a clear,
normal conversational voice.
4. When you have finished speaking, release the
TX indicator then disappears on the LCD.
The display shows
transmission is being received by
your radio.
to transmit.
when a
PTT
Switch
[PTT]
and listen for a response.
7
SCAN
DUP
MEM
OS/GS
SCAN
DUP
Need help?
Do you have a question about the UH-040XR and is the answer not in the manual?