Samsung SRD-830 User Manual page 32

web viewer
CONNECTING WEB VIEWER
1. Open your web browser and type the IP address or URL
of DVR into the URL address box.
M
The basic URL of the DVR is as following in case of MAC
address :
00-00-F0-ab-cd-ef : nabcdef.websamsung.net
�
00-16-6c-ab-cd-ef : mabcdef.websamsung.net
�
00-68-36-ab-cd-ef : pabcdef.websamsung.net
�
00-09-18-ab-cd-ef : iabcdef.websamsung.net
�
You can also use registered URL which setups up in the Setup menu of your DVR.
�
2. Set the Admin ID and password same to those of the DVR
Admin.
For general users, enter the DVR user ID and password.
M
It allows up to 10 simultaneous access including the Admin
�
and general users.
It does not allow multiple login of the Admin user.
�
Initial password of the Admin user is set to "4321".
�
Password of the Admin and general users can be changed in <Permission Management> menu of the DVR.
�
Normal users should have set < Viewer> under <Permission Management> to "Use" before connecting to the
�
Web Viewer. (Page 41)
All settings are applied by the DVR's settings.
�
3. Click <Install ActiveX Control...>.
Downloading Active-X control may take several minutes
according to the security settings on your PC.
4. Click <Install>.
5. You may have "Windows Security Alert" that attempts to
block this with the Windows Firewall. In that case, click
<Unblock > to start Web Viewer.
6. Installation is complete.
Now you can see the main screen of Live Viewer.
76_ web viewer