Samsung SRD-830 User Manual page 25

using the DVR using the DVR
When a router is used When a router is used
J J
To avoid IP address conflict with the DVR's static IP, check followings : To avoid IP address conflict with the DVR's static IP, check followings :
� �
Setting the DVR with a static IP Setting the DVR with a static IP
• •
- Internet connection : You can connect the DVR to a router which is connected to an ADSL/Cable modem or - Internet connection : You can connect the DVR to a router which is connected to an ADSL/Cable modem or
a router in a Local Area Network (LAN) environment. a router in a Local Area Network (LAN) environment.
Setting the DVR Network Setting the DVR Network
• •
Set the Set the < <Connection Mode Connection
1. 1.
Check whether the set IP address is in the static IP range provided by the IP router. Check whether the set IP address is in the static IP range provided by the IP router.
2. 2.
IP IP, Gateway, and Subnet Ma , Gateway, and Subnet
Check whether the set IP address is in the static IP range provided by the IP router. Check whether the set IP address is in the static IP range provided by the IP router.
� �
J J
If a DHCP server is configured with starting address (192.168.0.100) and end address (192.168.0.200), you should If a DHCP server is configured with starting address (192.168.0.100) and end address (192.168.0.200), you should
� �
set the IP address out of the configured DHCP range (192.168.0.2 ~ 192.168.0.99 and 192.168.0.201 ~ set the IP address out of the configured DHCP range (192.168.0.2 ~ 192.168.0.99 and 192.168.0.201 ~
192.168.0.254). 192.168.0.254).
3. 3. Check the Gateway address and subnet mask are equal to those set in the IP router. Check the Gateway address and subnet mask are equal to those set in the IP router.
Setting the DHCP IP Address of the IP router Setting the DHCP IP Address of the IP router
• •
1. 1. T To access o access the IP r the IP router'
router and enter the router's address (ex : http://192.168.1.1). router and enter the router's address (ex : http://192.168.1.1).
2. 2. At this At this stage, m stage, make the ake the
Ex) IP : 192.168.1.2 Ex) IP : 192.168.1.2
Subnet Mask : 255.255.255.0 Subnet Mask : 255.255.255.0
Gateway : 192.168.1.1 Gateway : 192.168.1.1
- Once connected to the IP router, it prompts with password. While entering nothing to the User Name field, - Once connected to the IP router, it prompts with password. While entering nothing to the User Name field,
enter " enter "admin admin" into the password field and press < " into the password field and press
- Access the router's DHCP configuration menu and set its DHCP server activation, and provide the start and - Access the router's DHCP configuration menu and set its DHCP server activation, and provide the start and
end address. end address.
Set the start address (192.168.0.100) and end address (192.168.0.200). Set the start address (192.168.0.100) and end address (192.168.0.200).
M M
Above Above s steps ma teps may differ
� �
Setting Router's Port Forwarding Setting Router's Port Forwarding
• •
Set the protocol to < Set the protocol to
1. 1.
2. 2. External Port Range : Enter the TCP Port set in the External Port Range : Enter the TCP Port set in the
< < Port(TCP)> in < Port(TCP) > in <Protocol
If more than one DVRs are connected to the router, the If more than one DVRs are connected to the router, the
TCP p TCP port can ort can be be dif differen
3. 3. Internal PC IP Address : Enter the IP address set to the Internal PC IP Address : Enter the IP address set to the
< < IP IP> in < > in <Connection Connection> menu of the connected DVR.
4. 4. Internal Port Range : Set the same to the Internal Port Range : Set the same to the "
Range". Range ".
M M
Above Above s steps ma teps may differ
� �
Port forwarding is required when you want to access the DVR connected to the router from outside of the router's Port forwarding is required when you want to access the DVR connected to the router from outside of the router's
network. network.
64_ 64_ using the DVR using the DVR
Mode> in < > in <Connection Connection> menu of the connected DVR to <
Mask : Consult sk : Consult your network your network
outer's config s configuration urations, open s, open
local local PC PC's wind 's windows netw ows network con
y differ from the from the router router d device evices dependi s
<TCP TCP>. >.
Protocol> menu of the connected DVR. > menu of the connected DVR.
ferent. t.
> menu of the connected DVR.
"External Port External Port
y differ from the from the router d router device evices dependi s
> menu of the connected DVR to
manager. manager.
a web a web b brows rowser on th er on the local e local
ork configurati figurations to ons to the belo the
<OK OK > to access the router configurations. > to access the router configurations.
depending on the ng on the manufac manufacturer turer. .
Connection Mode Connection Mode
Connection Connection
  Protocol Protocol Type Type
Port(TCP) Port(TCP)
 
  Port(UDP) Port(UDP)
Unicast/Multicast Unicast/Multicast
 
Multicast IP Multicast IP
 
TTL TTL
 
  Webviewer Webviewer Port Port
depending on the ng on the manufac manufacturer turer. .
<Static IP Static IP>. >.
PC that PC that is con is connected to nected to the IP the IP
below examp w example : le :
Protocol Protocol
TCP TCP
554 554 ~ ~ 557 557
8000 ~ 8159 8000 ~ 8159
Unicast Unicast
224.126. 63. 1 224.126. 63. 1
5 5
80 80
OK OK Cancel Cancel