Samsung SRD-830 User Manual page 27

using the DVR
Mailing Service
You can send an e-mail to a DVR-registered user at a specific time interval, or if an event occurs.
M
If an event occurs with a channel where the camera's video is set to <OFF> or the remaining recording count is set
�
to <OFF>, only the text notification will be sent to the applicable email address.
SMTP Setting
Sets the SMTP mail server.
Using the mouse may help make setup easier.
In the <Network > setting window, press the up/down
1.
( �� ) button to move to <Mailing Service> and press the
[ENTER] button.
2. Select <SMTP>.
You will see the SMTP setting window.
Use direction buttons ( ��◄ ► ) to move to a desired item
3.
and set the value.
ServerType : Displays the connected server type.
•
Server : Enter a server to connect to.
•
Port : Sets the communication port.
•
Use Authentication : Check this if the SMTP server uses user authentication.
•
The account input box will be activated.
User : Enter a user to use authentication when connecting to the SMTP server.
•
Password : Enter the password of the SMTP server user.
•
Secure Transfer : Select one from <Never > and <TLS (if available)>.
•
Sender : Use the virtual keyboard to enter the sender's e-mail address.
•
Refer to "Using Virtual Keyboard". (Page 38)
�
TEST : Conducts the test on the server settings.
•
4. When the SMTP setting is done, press <OK > .
Event Setting
You can set the interval and type of the event that will be sent to the user.
Using the mouse may help make setup easier.
In the <Network > setting window, press the up/down
1.
( �� ) button to move to <Mailing Service> and press the
[ENTER] button.
2. Select <Event>.
Use direction buttons ( ��◄ ► ) to move to a desired item
3.
and set the value.
Event Interval : Set the event interval.
•
If a series of events occurs, the e-mail will be sent at the specified
�
interval, not on each event.
Use Event Transfer : Select an event type to send if an event occurs.
•
If the selected event occurs, the e-mail will be sent to the group that has the recipient authority.
4. When the event setting is done, press <OK > .
66_ using the DVR
Mailing Service
SMTP
Event Group
ServerType SMTP mail Server

Server

Port 25

Use Authentication
 User
Password

********
Secure Transfer Never

Sender ex. user@example.net

TEST
OK Cancel
Mailing Service
Event
SMTP Group
 Event Interval 10 min
Use Event Transfer
Sensor Motion
Change P/W HDD Info
Power On/Off Manual Record
OK Cancel
Recipient
Recipient
Video Loss