Getting Started Battery Installation - Uniden UH-040XR Operating Manual

GETTING STARTED
BATTERY INSTALLATION
Your UH040XR radio uses 3 AA ALKALINE batteries for power.
Please refer to page 14 should you wish to use rechargeable batteries.
To install the batteries:
Do not mix old and new batteries to avoid damage to the unit.
1. Make sure your radio is off.
2. Release the battery cover clip, then
remove the battery cover.
3. Insert 3 AA ALKALINE batteries
according to the polarity symbols
inside the battery compartment.
4. Align the battery cover tabs with the
UH040XR tab holes then replace
the cover.
Note: Batteries are not supplied
Tab holes
4