Advertisement
OPERATOR
TROUBLESHOOTING
Should the unit malfunction or not per-
We highly recommend that you consult
form properly, the operator should per-
a qualified radiotelephone technician
form the procedures indicated below:
for the seNicing and alignment of this
CB radio product
1. Ifthe transceiver is completely inop-
erative.
* Check the power cord and fuse.
2. If trouble is experienced with receiv-
ing.
* Check ON/OFF VOLUMECON-
TROLsetting.
*
Be sure SQUELCHis adjusted
properly.
If the radio over-
squelched?
* Check to see that the radio is
switched to an operational mode.
3. If trouble is experienced with trans-
mitting.
* Check to see that the transmission
line (coaxialcable) is securely con-
nected to the ANTENNA CON-
NECTOR.
* Be sure that the antenna is fully
extended for proper operation.
*
Besure that all transmission line
(coaxialcable) connections are se-
cure and free of corrosion.
Please refer to the WARNING informa-
tion contained
in this Owner's Guide.
(NOTE: When ordering parts, it is es-
sential to specify the correct model
number and serial numberof the unit)
Advertisement
