Table of Contents
Advertisement
f'
'I
.J
GENERAL
Channels
Frequency Range
Frequency Control
Frequency Tolerance
Frequency Stability
Operating Temperature Range
Microphone
Input Voltage
Current Drain
Cabinet Dimensions (mm)
Weight
Antenna Connector
Meter
Indicators
TRANSMITTER
Power output
Modulation
Intermodulation
Distortion
SSB Carrier Suppression
Unwanted Sideband
Frequency Response
Output Impedance
SSB Filter
Output Indicators
SPECIFICATIONS
10 AM, 10 USB
27.680 to 27.980 MHz
Phase Locked Loop(PLL) synthesized circuitry
:1:0.005%
0.001 %
-20°C to +50°C
Plug-in type, dynamic with push-to-talk switch
and coiled cord
13.8V DC nominal,
15.9V max., 11.7V min.
(positive or negative ground).
Transmit: AM full mod., 2.2A; SSB 12 watts PEP
output, 2A.
Receiver:
AM & SSB with maximum
audio
output, 0.6A.
185(W) x 231(D) x 58(H)
3.3 Lbs (1.52 kg)
UHF, SO-239
Illuminated; indicates relative power output and
received signal strength, green receive LED.
LED display; channel, channel 88, TX/RX and
AM/SSB.
AM,4 watts
SSB, 12 watts, P.E.P.
AM, high and Iow level
SSB: 3rd and 5th order, better than -25 dB.
7th and 9th order, better than -35 dB.
Better than -55 dB
Better than -50 dB
AM and SSB: 350 to 2500 Hz.
52 ohms, unbalanced
10.695 MHz, 8 pole monolithic type
6 dB @4.2 kHz
60 dB @7.0 kHz
Meter shows relative RF output
power; 'red
transmit LED.
-2-
Advertisement
Table of Contents
