Product Overview; Controls - Toro TX 525 Operator's Manual

Product Overview

1. Road wheels
2. Track
3. Lift cylinder
4. Cylinder lock
5. Loader arms
6. Hood
7. Auxiliary hydraulic
couplers
Figure 3
8. Mount plate
9. Reverse-safety plate
10. Control panel
11. Tie-down/lift loop
12. Rear-access cover
13. Side panel screen

Controls

Become familiar with all the controls
you start the engine and operate the traction unit.
Control Panel
g313997
1. Auxiliary hydraulics lever
2. Key switch
3. Hour meter
4. Fuel gauge
5. Indicator lights and
glow-plug switch
6. Throttle lever
Key Switch
g313998
The key switch, used to start and shut off the engine,
has 3 positions: O
Starting the Engine (page
Throttle Lever
Move the control forward to increase the engine speed
and rearward to decrease speed.
Reference Bar
When driving the traction unit, use the reference bar
as a handle and a leverage point for controlling the
traction control and the auxiliary-hydraulics lever. To
ensure smooth, controlled operation, do not take
both hands off the reference bar while operating the
machine.
9
(Figure
Figure 4
7. Loader-arm/attachment-tilt
lever
8. Parking-brake lever
9. Traction control
10. Reference bar
11. Loader-control-reference
bar
12. Loader-valve lock
, R , and S . Refer to
FF UN TART
16).
4) before
g013016