Table of Contents
Advertisement
Declaration of conformity
18
Maintenance and repair
Please heed the current safety and ac-
cident prevention regulations during all
maintenance and repair work.
The machine requires a minimum of care and mainte-
nance. Only a few items need to be checked to ensure
trouble-free long-term operation.
 Check the following points for damage before starting
up the welding machine,
– Mains plug and cable
– Welding torch and connections
– Ground cable and connection
– Keyboard membrane and control panel
 Check the dust filter every two months.
– Switch the machine off
– Disconnect the mains plug
19
Disposal
Only for EU countries.
Do not dispose of electric tools together
with household waste material!
20
Service
Lorch Schweißtechnik GmbH
Im Anwänder 24 - 26
71549 Auenwald
Germany
Phone +49 (0) 7191 503-0
Fax
+49 (0) 7191 503-199
21
Declaration of conformity
We herewith declare that this product was manufactured
in conformance with the following standards or official
documents EN 60974-1:2012, EN 60974-3:2014, EN
60974-10:2007 CL.A in conformance with the guidelines
2014/35/EU, 2014/30/EU, 2011/65/EU.
2016
Wolfgang Grüb
Managing Director
Lorch Schweißtechnik GmbH
11.18
– Unscrew the ventilation grid on the rear side
– Check the dust filter for pollution
– Replace the dust filter if it is polluted ( dust filter :
Order number 612.5193.0)
In observance of European Directive 2002/96/EC on
waste, electrical and electronic equipment and its imple-
mentation in accordance with national law, electric tools
that have reached the end of their service life must be
collected separately and returned to an environmentally
compatible recycling facility.
909.1550.1-08
Use only original Lorch spare parts for
maintenance and repair.
If you experience problems or need re-
pairs, contact a dealer authorised by Lorch.
Never make repairs or technical changes
yourself. In this case the manufacturer's
warranty is no longer valid.
- 25 -
Hide quick links:
Advertisement
Table of Contents
