E4 - Replacing Lcd, Charger Port Or Emergency Shut Off Switch - Vancare P-600 Technical Manual

Remove Hook Bracket Assembly
Separate Hook Bracket Assembly
Slide Off Top Cover
Replace the microswitches
E4 – Replacing the LCD, Charger port, Emergency Shut Off Switch.
1. Use a Phillips screw driver to remove the LED or the charger port from the required lift cover.
2. Replace the afftected LCD or Charger port with a new component as required.
3. To remove the emergency shut off switch, press on the sides of the shut off switch and push it
through the opening in the side cover.
P-600 Technical Manual REV: 101316 Page 19