Bang & Olufsen BeoVision 4 User Manual page 36

36
>> Adjust picture and sound settings
Change volume, bass, treble or
loudness
You can adjust sound volume, select a speaker
combination or adjust the speaker balance
directly on Beo4 at any time without bringing
up a menu, but you must bring up the Sound
menu in order to be able to adjust bass,
treble or loudness.
Setup
1 Tuning
2 Sound
3 Picture
4 Connections
5 Menu
6 Clock
Sound
1 Adjustment
2 Speaker type
3 Speaker distance
4 Speaker level
5 Speaker mode
6 Sound system
Counter Volume Bass Tape Treble Speed Loudness
Time used 240 SP 32 0 0 On
*NOTE! The Sound menu lets you calibrate your
surround sound speaker setup permanently. For
further information, refer to the chapter
'Loudspeaker connections – surround sound' on
page 13 in the Reference book.
To change volume, bass, treble or loudness...
> Press MENU to bring up the main menu.
> Press 3 to bring up the Setup menu.
> Press 2 to bring up the Sound* menu.
> Press GO to bring up the Adjustment menu.
> Press l or n to move between menu
items.
> Press m or p to adjust the settings for each
item.
> Press EXIT to store your settings until you
switch off BeoVision 4, or...
> ...press GO to store your settings permanently.
The content of the 'Sound' menu depends on how
many speakers are connected.
PDC&VPS Marker
On On