Bang & Olufsen BeoVision 4 User Manual page 19

Timed play via teletext
It is also possible to program timed play
settings via teletext.
To enter timed play settings via teletext...
> Press MENU while Start (start) is highlighted to
bring up teletext.
> Enter the number of the teletext page you
want.
> When the page is found, press MENU to make
a timed play programming. A cursor highlights
the fi rst start time on the list.
> Press m or p to move the cursor to the
programme you wish to make a timed play for.
> Press GO to accept the start time.
> Press m or p to move to the stop time you
want, and press GO to accept it.
> A line appears on top of the teletext page listing
the start and stop time, followed by 'OK?'.
> Press GO to store your timed play settings.
To activate the timed play function
You must activate the timed play function in
order for your Timers to be executed.
To activate the timed play function...
> Press MENU to bring up the main menu.
> Press GO to bring up the Timer play menu.
> Press 2 to bring up the Activate timer menu.
> Press m or p to reveal Yes. To switch off the
Timer play function, select No instead.
> Press GO to store your timed play settings, or...
> ...press EXIT to leave all menus without storing.
If you connect a Bang & Olufsen audio or video
product to BeoVision 4 with a Master Link cable,
you can exclude or include it in timed functions
via the Timer play menu. For example, set the
BeoVision 4 Timer to Yes and the audio system
Timer to OFF if you wish timed functions to apply
only to BeoVision 4.
For further information about how to switch the
Play Timer on or off for a connected Bang &
Olufsen audio or video product, refer to the Guide
enclosed with the product.
View, edit or delete a Timer
Bring up an on-screen list of the Timer
settings you have entered. From this list, you
can edit or delete your Timer settings.
To view, edit or delete your Timer settings...
> Press MENU while Source (source) or Pr
(program) is highlighted in the Set timer menu
to bring up a current Timer index of previously
entered Timer settings.
> Press p or m to move through the list to a
setting you wish to edit or delete.
> To edit a setting, press GO and follow the
procedure described earlier.
> To be able to delete a setting, press MENU. The
date is replaced by Clear?
> Press GO to delete the setting, or EXIT to keep
it.
19