Bang & Olufsen BeoVision 4 User Manual page 32

32
If you connect additional video
sources or equipment to BeoSystem 2,
you must register the equipment in
the Connections menu.
The settings you select in the
Connections menu tell BeoSystem 2
what is connected.
For information about where and
how to connect extra equipment,
refer to the chapters 'Connect
additional equipment' on page 18 in
the Reference book as well as 'Socket
panels' on page 9 in the Reference
book.
When your additional video
equipment has been connected and
registered in the Connections menu,
as described, you can operate it with
the Beo4 remote control.
*NOTE: Choose (DTV) for a primary set-top box
and (V.AUX) or (AUX) for a secondary set-top box.
Register additional video equipment
What is connected?
Registering the equipment connected to
BeoSystem 2 enables you to activate it with
the Beo4 remote control.
Setup
1 Tuning
2 Sound
3 Picture
4 Connections
5 Menu
6 Clock
V. Mem AV
V. Mem DVD
> Press MENU to bring up the main menu.
> Press 3 to bring up the Setup menu.
> Press 4 to bring up the Connections menu.
> Press n to select a socket.
> Press m or p to step through the list of
available equipment types until you fi nd what
you have connected. Select None if nothing is
connected.
> When you have selected your equipment types,
press GO to store your settings, or...
> ...press EXIT to leave all menus without storing.
Equipment you can connect to each socket
V.Mem
V.Mem... for a Bang & Olufsen video recorder
DVD... for a DVD player
STB (DTV), STB (V.AUX)... for a set-top box*
None... if nothing is connected
AV
DVD... for a DVD player
DVD (YPbr)... for a DVD player connected to the
VGA-IN socket.
Decoder
Decoder
STB (DTV), STB (V.AUX)... for a set-top box*
V.AUX... for other equipment
Non B&O V.TP2... for a non-Bang & Olufsen
video recorder
DVD2... for a second DVD player or video
recorder
DVD2 (YPbr)... for a second DVD player or video
recorder connected to the VGA-IN socket.
S-VHS V.TP2... for a Super-VHS video tape
recorder
Decoder(2)... for a second decoder – Connect
your primary decoder to the DECODER socket
None... if nothing is connected