Bang & Olufsen BeoVision 4 User Manual page 22

22
You choose whether or not to
activate the pincode system. The
pincode system is deactivated when
you delete your pincode.
The pincode system is intended to
make normal use of BeoSystem 2
impossible for someone who does
not know the pincode.
When BeoSystem 2 has been
disconnected from the mains for 15–
30 minutes, the pincode system goes
into effect.
When reconnected and switched on,
BeoSystem 2 automatically switches
itself off after four minutes. Entering
the pincode returns BeoSystem 2 to
normal.
When the pincode system is active
and you reconnect your BeoSystem 2
to the mains, you may not be able to
switch it on immediately – wait
approximately 30 seconds and try
again.
Should you lose or forget your code,
contact your Bang & Olufsen retailer
to receive a mastercode which
disables your pincode.
NOTE! You can change your pincode up to fi ve
times within a three-hour period.
The pincode system
Activate the pincode system
Menu
1 Timer play
3 TV list
4 Setup
Pincode Confirm pincode
----
- - - -
While the system is switched
on...
Press to bring up the main menu
Press l twice, followed by
STOP. The Pincode menu
appears on the screen
Use the number buttons on
Beo4 to enter the four digits of
your code
Press to move the cursor to
Confi rm pincode when you have
entered your code once
Re-enter the code. If the two
codes are not identical, the input
fi elds are cleared and you must
enter the code again
Press to store the code
To cancel a code entry...
Press to cancel a code entry, and
the input fi elds are cleared
Change or delete your pincode
Pincode
1 Delete code
2 New code
New pincode Confirm pincode
----
While the system is switched
on...
MENU Press to bring up the main menu
l l Press l twice, followed by
STOP STOP. BeoSystem 2 prompts you
for your pincode
0 – 9 Enter your pincode
If the code is incorrect, the input
n
fi elds are cleared and you must
enter the code again
When you have entered your
0 – 9 code, the Pincode menu
prompts you to delete your code
or enter a new code
Press 1 to delete your code, or 2
GO to enter a new code
Enter the new code
STOP
Press to move the cursor to
Confi rm pincode, when you have
entered your new code once
Re-enter the new code
Press to store the new code
To cancel a pincode entry...
Press to cancel a code entry, and
the input fi elds are cleared
- - --
MENU
l l
STOP
PIN _ _ _ _
0 – 9
PIN ** _ _
PIN _ _ _ _
1
2
0 – 9
n
GO
STOP