note
• Do not use the base
and the handset
keypads at the same
time to place a call
on hold.
• If a line is in use, or a
phone is off the hook,
"
"
appears on the display.
B A S I C S
[ 20 ]
Placing a Call on Hold
Use either the keypad on the handset or the keypad on the base.
Using the Speakerphone Mute Feature
Your TRU3466 allows you to mute your conversation from the base. This prevents
the par ty you are speaking to from hearing what you, or someone else in the
room, is saying.
For example, to use this privacy feature while using line 1.
1) To place line 1 on hold at the base,
press hold. The line 1 LED turns from
green to red.
2) To place line 1 on hold at the
handset, press cid/hold.
The following screen appears:
3) To pick up the call that is holding,
press line 1 on the base or handset.
1) Press mute. The line 1 LED flashes red.
You can hear the par ty on line 1, but they cannot
hear you.
2) When you are ready to continue your conversation with
the par ty on line 1, press mute again or line 1 . The line 1
LED changes to green.