Table of Contents
Advertisement
[ 32 ] M E M O R Y F E A T U R E S
4) Press L/up/intcm or M/down/conf. to select
"
", then press select/channel.
The following screen appears.
The cursor flashes indicating that the display is ready
for the name to be edited. When a name has not been
stored, the cursor appears at the beginning of the
second line.
5) Use the number keys,
(See page 26.) To edit only the phone number, skip this step.
6) Press select/channel. The following screen appears.
The cursor flashes indicating that the display is ready
for the number to be edited.
7) Use the number keys, redial/pause or delete/volume to
edit the phone number.
The phone number cannot exceed 20 digits. (See page 27.)
If you don´t want to change the phone number, skip this step.
8) Press select/channel. The handset beeps and displays the
conf irmation screen. The memor y storage is complete.
For example, if you store a name and number into
memor y location number 1, the display shows few
"
"
" is displayed.
9) Press memory to return to standby mode.
/
/tone , # /
, or delete/volume to edit the name.
t
t
s
*
". Af ter a few seconds,
Advertisement
Table of Contents
