Operator's Obligations - Bosch Rexroth 3 Series Instruction Manual

General instructions on damage to property and the product
Danger from chemical or corrosive environmental conditions!
Product can get damaged! If the axial piston unit is exposed to chemical or
corrosive environmental conditions, such as sea water, fertilizer or road salt, it can
result in corrosion or, in extreme cases, malfunction. Hydraulic fluid can escape if
leaks occur.
▶ Take appropriate steps to protect the axial piston unit from chemical or
corrosive environmental conditions.
Escaping or spilling hydraulic fluid!
Risk of environmental pollution and contamination of ground water!
▶ Always place a drip tray under the axial piston unit when filling and draining the
hydraulic fluid.
▶ Use an oil binding agent if hydraulic fluid is spilled.
▶ Observe the parameters in the safety data sheet for the hydraulic fluid and the
specifications provided by the system manufacturer.
Danger from hot components!
Nearby products can become damaged! Components which heat up (for example,
solenoids) can cause damage to nearby products if they are too close.
▶ When installing the axial piston unit, check the distances to nearby products to
ensure that they do not get damaged.
The warranty only applies to the delivered configuration.
The entitlement to warranty cover will be rendered void if the product is incorrectly
installed, commissioned or operated, or if it is used or handled improperly.

3.1 Operator's obligations

The operator has the obligation to check in the order confirmation that the axial
piston unit supplied corresponds to the ordering details.
NOTICE
RE 92105-01-B/06.2017, A4CSG, Series 3x, Bosch Rexroth AG
17/68