Setting Ring Time Switch - Uniden EXS 9950 Owner's Manual

Setting ring time switch

The ring time/toll saver switch
allows you to set the number of
rings the caller hears before the
answering system plays your
outgoing message. You can set
the switch to answer after two
rings or after four rings.
Once the greeting has started, you can stop it when you pick up
the call at the handset or base.
If you answer at another phone extension and the
greeting has started, you cannot stop the message.
Wait until your greeting is complete before starting
your conversation.
In the TS (Toll Saver) position, the answering system picks up
after two rings if you have new messages, and after four rings if
there are none. This way, if you the call long distance to check
your messages, you can hang up after the third ring to avoid
billing charges.
RING TIME
2/4/TS
26