Miele KM 7678 FR Operating And Installation Instructions page 8

Table of Contents

Advertisement

Warning and Safety instructions
Never open the casing of the hob.
Touching or tampering with electrical connections or components
and mechanical parts is highly dangerous to the user and can cause
operational faults.
While the hob is under warranty, repairs should only be
undertaken by a Miele authorised technician. Otherwise the warranty
is invalidated.
Miele can only guarantee the safety of the appliance when
genuine original Miele replacement parts are used. Faulty
components must only be replaced by Miele spare parts.
The hob is not intended for use with an external timer switch or a
remote control system.
The hob must be connected to the electricity supply by a qualified
electrician (see "Installation – Electrical connection").
If the mains connection cable is damaged, it must be replaced
with a special mains connection cable by a qualified electrician (see
"Electrical connection" in the "Installation" chapter).
The hob must be disconnected from the mains electricity supply
during installation, maintenance and repair work. Ensure that power
is not supplied to the appliance until after it has been installed or
until any maintenance or repair work has been carried out.
Danger of electric shock.
Do not use the hob if it is faulty, or if the ceramic surface is cracked,
chipped or damaged in any way. Switch it off immediately,
disconnect it from the mains electricity supply and contact your
Miele dealer.
If the hob is installed behind a cabinet door, do not close the door
while the hob is in use. Heat and moisture can build up behind the
closed door. This can result in damage to the hob, the housing unit
and the floor. Do not close the door until the residual heat indicators
go out.
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km 7678 flKm 7878 flKm 7697 frKm 7697 flKm 7897 fl

Table of Contents