Miele KM 7678 FR Operating And Installation Instructions page 49

Issue
The Booster has
deactivated early
automatically.
A zone is not working in
the usual way on the
power setting selected.
In comparable cooking
and frying processes
there are slight
differences in cooking
durations and browning.
The food in the pan
does not heat up when
the Auto heat-up
function is switched on.
An operating noise can
be heard after the
appliance has been
switched off.
 alternating with 
flashes in the timer
display.
1 and a number
(e.g. 1-0) is flashing
alternately with a 3-digit
number in the timer
display.
Cause and remedy
The overheating protection mechanism has been
activated.
 See "Safety features".
The overheating protection mechanism has been
activated.
 See "Overheating protection" in the "Safety
features" chapter.
This is not a fault.
The pan base material and the positions of the pans
on the hob affect the power of the induction coils.
This in turn affects the cooking behaviour.
A large amount of food is being heated up.
 Start cooking at the highest power level and then
turn down to a lower one manually later on.
The pan is not conducting heat properly.
 Use a different pot or pan which conducts heat
properly.
The cooling fan runs until the hob has cooled down
and then switches off automatically.
The hob is incorrectly connected.
 Contact your Miele dealer. The hob must be
connected to the mains according to the wiring
diagram.
Fault in a zone
 Disconnect the power supply to the hob for
approx. 1 minute.
 If the problem persists after power has been
restored, please contact your Miele dealer.
Problem solving guide
49