Overview; Board Structure - Huawei ME60 Series Hardware Description

ME60
Hardware Description

1.10.1 Overview

This chapter describes the appearance and structure of boards and subcards, filler panel, board
and subcard specifications, rules for numbering slots and interfaces.

1.10.1.1 Board Structure

This section describes the appearance and structure of boards and subcards.

1. Captive screw

Issue 01 (2018-05-07)
Structure of the integrated board
The integrated board on the ME60 is a plug-in board and consists of the circuit board,
connector, heat sinks, interface panel, ejector lever, and captive screws, as shown in
Figure 1-83.
Figure 1-83 Structure of the integrated board
2. Interfaces
Structure of the flexible board
A flexible board consists of two parts:
− Motherboard
− Flexible subcard
− Structure of the motherboard
The flexible board is a plug-in board and consists of the circuit board, connector,
heat sinks, interface panel, ejector lever, and captive screws, as shown in Figure
1-84.
3. Ejector lever
1 Hardware Description
4. Protection cover
143