Bosch PTK 3,6 LI Original Instructions Manual page 30

30 | English
Protect the power adaptor against moisture!
u
Battery charge
Red
Battery char- −
ging
−
Operation −
●
✹ Flashing ● Continuous light
Loading the Magazine (see figure B)
Use only original Bosch accessories. The precision parts of the tacker,
u
such as the magazine, striker and shot duct, are matched to Bosch
staples. Other manufacturers use different steel grades and sizes.
– Turn the power tool around.
– Press the magazine release (6) and pull the magazine (11) out of the
back of the tool at the same time.
– Insert the staple strip (10) with the staple tips pointing upwards.
– Slide the magazine (11) back in until it clicks into place.
Do not use force when opening, loading or closing the magazine.
u
Operation
Starting Operation
Tacking
– First, firmly place the tacker head (1) against the workpiece until it is
pushed in to the material by a few millimetres.
– Maintain the contact pressure and briefly press the trigger (5).
– Once the staple has been completely driven in, release the trigger (5) and
lift the tacker head (1) from the workpiece.
1 609 92A 5KH | (19.06.2020)
Meaning
indicator
Green
The battery is being charged.
✹
● Battery fully charged.
● The battery has more than 30 % ca-
pacity.
− The battery has less than 30 % capa-
city and should be charged.
Bosch Power Tools