Illumination Brightness; Setup Menu - Philips AJL308 User Manual

Hide thumbs Also See for AJL308:
Table of Contents

Advertisement

Sleep / Illumination
Sleep
The clock radio has a built-in sleep timer,
which enables the set to automatically turn
off sound during radio or music playback
after a set period of time.
Option 1:
1 Press TUNER.
2 Press SLEEP until your desired sleep option
is displayed.
➜Radio will turn on if radio was previously
turned off.
Option 2:
1 Press CLOCK or PHOTO/VIDEO to
enter respective mode.
2 Press MENU.
3 Press 1 2 to highlight "General".
4 Press 34 to select "Sleep Timer Music".
5 Press 1 2 to select specific music you like.
➜The set will turn on with the music you
select.
Option 3: using USB/Memory card
(SD/MMC)
1 Repeat steps 1-8 described in "Listening to
music".
2 Press SLEEP until your desired sleep option
is displayed.
To deactivate sleep function
When sleep is activated,
is display.
Press SLEEP until "Off " is displayed.

Illumination brightness

The LCD brightness can be adjusted
manually and automatically.
Manually adjusting
Press REPEAT ALARM /
BRIGHTNESS
once or more to cycle screen
CONTROL
brightness through 4 levels.
Automatically adjusting
To avoid strong light emitting from the unit at
night time, the auto dim function can be used
to adjust the brightness to the lowest level
automatically.
1 Press MENU.
2 Press 1 2 to highlight "General".
3 Press 34 to select "Auto Dim Timer".
4 Press 1 2 to select "On".
5 Press 34 to select "Auto Dim - Start".
6 Press 1 2 to select the time that auto dim
will start.
7 Press 34 to select "Auto Dim - End".
8 Press 1 2 to select the time that auto dim
will end.
When auto dim is set, during auto dim time
span, the LCD brightness will be auto
adjusted to the lowest level. Press any
button to increase the brightness and it will
last 10 seconds.
Using the stand
The set is equipped with a stand on the
bottom panel.To set the set for a different
viewing angle take the stand out, then place it
back by reversing (see the figure below) the
side of the stand.

Setup menu

Using Setup menu options
The setup menu offers you advanced fea-
tures.
1 Press MENU.
➜The menu appears.
2 Press 1 2 to select "General".
3 Press 3 4 to select an item.
4 Press 1 2 to select an option under the item.
4 After finishing the setting, press CLOCK,
TUNER, PHOTO/VIDEO or MUSIC to
exit the setup menu.
Setup
Option
Language
English/Français/Deutsch/Español
Brightness
-3~3
Auto Dim Timer
Off/On
Auto Dim - Start
21: 00
Auto Dim - End
7: 00
Wall Paper
Blue/Green/Red/Purple
Sleep Timer Music
3 music files are preset
Picture Display
Slideshow mode/Browse mode
Slideshow Sequence
Sequential/Random
* Slideshow Effect
None/Random /16 effects available
Slideshow Frequence
5 Seconds/10 Seconds/ 30 Seconds/
1 Minute/ 5 Mintues/30 Minutes
1/ Hour/ 2 Hours
Wide screen/Normal
Display Format
File Information Display Off/On
Video Display
Playback Time/Remain Time
DivX VOD
Restore Default
Reset
settings
* = To turn on slideshow effect, you must select slideshow mode in "Picture Display".
Description
Select a desired on screen display
language
Select a brightness value
Turns on or off auto dim for LCD
brightness.
Set the start time for auto dim
Set the end time for auto dim
Select different color for LCD
background
Select one file for sleep function
Select different mode to display picture
Select different slideshow sequence
Select different slideshow effects
Select different slideshow intervals
Select picture display format
Turns on or off file name display
Select different video time to be
displayed
Press OK to get DivX registration
code.
Press OK to restore to the factory
default settings.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ajl308/05

Table of Contents