Redial; Tone; Traveling Out-Of-Range; Channel - Uniden EXA 7950 Owner's Manual

NOTE
The tone feature only
applies when the base unit
is set to pulse.
TIP
Adjust the speakerphone
volume by pressing for
louder or for softer.

REDIAL

The key redials the last number dialed. The redialed number
redial
can be up to 32 digits long.

TONE

If you are dialing in the pulse mode
and need to enter tone digits, press
to enter the digits. Once the call
tone
has ended, the tone mode is canceled
and pulse dialing resumes.

TRAVELING OUT-OF-RANGE

During a call, as you begin to move your handset too far from your
base unit, noise increases. If you pass the range limits of the base unit,
your call will terminate within 20 seconds.

CHANNEL

To help eliminate background noise, press chan to change channels.

USING THE SPEAKERPHONE

To use the speakerphone to answer a call, press speaker on the base.
Direct your voice to the microphone on the bottom of the base. To
hang up, press speaker again.
To use the speakerphone while making a call, first dial the number
using the handset. Then press speaker on the base unit. You can press
talk to disconnect the handset and continue the call with the
speakerphone. Press speaker to hang up.

THREE-WAY CALL

First, dial the number using the handset. Then, press speaker to set up
a three-way call between the base, handset, and the person on the line.
7 8 9
tone
pqrs tuv
tone
0
#
oper
redial pause chan volume
m1 m2 m3
wxyz
15