Entering Your Area Code - Uniden DXI 4286-2 Series Owner's Manual

[ 1 5 ] B A S I C S E T U P
You must subscribe to Caller ID service through your local telephone provider to use this
feature.
1) When the phone is in standby mode, press and hold the call id/
menu key. The following screen appears.
2) Press the /vol/
3) Press the select/channel key to toggle and turn on Caller ID on
Call Waiting.
4) Press the end key and return the handset to main base to
complete the setting. The handset returns to standby mode.

Entering Your Area Code

If you can make a call by dialing only 7 digits (instead of 10), you can program your local
area code in your phone. If you get a call from within your area code, you'll only see the 7-
digit phone number. If you get a call from outside your area code, you'll see all 10 digits.
1) When the phone is in standby mode, press and hold the call id/
menu key. The following screen appears.
2) Press the /vol/
3) Press the select/channel key. If an area code was already stored,
the phone will display it.
key to select .
CI D CW
key twice to select A re a C o de .
w w w . u n i d e n . c o m