Adjusting The Earpiece Volume; Tone Dialing Switch-Over - Uniden DXI 4286-2 Series Owner's Manual

Adjusting the Earpiece Volume

To change the earpiece volume, press the
/vol/ key during a call.
Temporarily Mute Ringer
If the handset is off the cradle while an incoming call is
ringing, simply press the end key to mute the incoming
ring. The ringer will sound with the next incoming call.

Tone Dialing Switch-over

If your telephone company requires pulse dialing, you can
switch over to tone dialing after the call connects. This
feature is useful when you need tone dialing to use any
automated menu systems, such as telephone bank tellers,
telephone prescriptions refills, customer support menus,
etc.
If your phone is set to pulse dialing mode, make your call
normally. Once your call connects, press the
key. Any digits you enter from then on will be sent as tone
digits. When this particular call ends, the phone
automatically returns to pulse dialing mode.
w w w . u n i d e n . c o m
/vol/ or
/tone/
*
note
You can only mute the
handset ringer if the
handset is off the cradle
when the phone starts
ringing.
U S I N G Y O U R P H O N E [ 2 0 ]