Before Using, Register Extra Handset To; Main Base Unit - Uniden DXI386 Owner's Manual

• When you charge the
handset, Caller ID
summary screen and
the name of the
handset, HS1 appears.
If HS2 appears, you
are charging the
handset No.2.
• The smaller cradle is
simply an extra
charging device for
either handset.
[ 12 ] G E T T I N G S T A R T E D
Before Using, Register Extra Handset to the

Main Base Unit

When the dual handsets are removed from the packaging, the handset that is placed
in the main base unit first (to charge battery for 15-20 hours), will automatically
be registered to the main base unit. (It does not matter which handset you choose
to place in the main base unit first).
You will also need to register the extra handset by placing it in the main base
cradle. The extra handset WILL NOT operate properly until the registration has been
completed. Once the handset is registered, it is ready for use.
Follow these simple steps to register:
1) First, install the battery packs in both handsets. Place either handset in the main
base cradle, then place the extra handset in the extra charging cradle. Charge
both handsets for 15-20 hours.
2) After fully charging both batteries, remove the handset in the extra charging
cradle, and place it in the main base cradle. The LED light on the main base will
begin to flash, indicating that the registration is taking place between the extra
handset and the main base.
3) Wait for at least 5 seconds before removing the handset from the main base.
Congratulations, the registration has been completed, and your dual handset
cordless phone is ready for use!