Using The Caller Id List - Uniden DXI386 Owner's Manual

• You cannot make a
call from the Caller ID
list if your DXI386-2
series is connected to
private branch
exchange (PBX).
• When a long distance
call has been set,
¨ ¨ appears in
the display.
[ 38 ] C A L L E R I D F E A T U R E S

Using the Caller ID List

Calling a party from the Caller ID list
You can place a call from the Caller ID list. The DXI386-2 series stores up to
30 messages in each handset.
1) Press cid/menu. Select the phone number that you want to
dial by pressing
2) Press talk/flash. The displayed phone number dials
automatically.
Long Distance calls and Area Code Setting/Cancellation
Pressing 1 while the incoming Caller ID information is displayed (in step 1) will
place the prefix "1" in the display to set up for a long distance call. Pressing 3 will
set or cancel an area code setting.
Dial edit
You can temporarily edit the Caller ID number that is displayed by pressing
select/channel . A cursor appears in the display. Press delete/transfer to move the
cursor left, enter the new phone number you would like to dial and then press
talk/flash. This will not change the number in the Caller ID list memory.
or .