Connect The Main Base And Charging Cradle, And Charge The Handsets - Uniden DXAI4288-2 Owner's Manual

!
•Use only the supplied
AD-314 AC adapter
for the main base and
AD-310 or AD-1010
for the charging
cradle.
Do not use any other
AC adapter.
•Do not place the power
cord where it creates a
trip hazard or where it
could become chafed
and create a fire or
electrical hazard.
[ 9 ] I N S T A L L I N G T H E P H O N E
C. Connect the Main Base and Charging Cradle,
and Charge the Handsets
1) Connect the AC adapter to the DC IN 9V jack and to a
standard 120V AC wall outlet.
2) Place one handset in the main base and the other in the
charging cradle with the keypad facing forward.
3) Make sure the charge/in use LED and charge LED illuminate.
If the LED does not illuminate, check to see that the AC adapter is
plugged in and the handset makes good contact with the cradle's
charging contacts.
• Connect each AC adapter to a continuous power supply.
• Place each cradle close to the AC outlet to avoid long
extension cords.
4) Charge your handsets at least 15-20 hours before plugging the
phone line.
5) Once the handset battery packs are fully charged, connect
the telephone line cord to the TEL LINE jack and a telephone
outlet.
If your telephone outlet isn't modular, contact your
telephone company for assistance.
Modular
w w w . u n i d e n . c o m