Uniden DX 834 Series Operating Manual page 21

To dial a number previously stored in memory, follow
these steps:
1. Remove the Handset from the Base Unit.
2. Press .
3. Press .
4. Press the memory location number (0-9).
On certain occasions, after dialing a number, you
may be requested by the party or service you are
calling to enter a special access code, such as when
performing a banking transaction.
To do this, simply:
1. Store the access code into one of the memory
numbers.
2. Dial the main number.
3. At the appropriate time, press
by the memory location number where the
access code is saved.
DX834
To erase a number previously stored in a memory
location (0-9), follow these steps:
1. Remove the Handset from the Base Unit.
2. Press
3. Press the memory location number (0-9).
Note:
procedure will be canceled if more than 20
seconds elapse between each keystroke entry or
step.
followed
twice.
An error tone will sound and the erase
21