Uniden DX 834 Series Operating Manual page 13

Standard Wall Plate Mounting
These phones are designed to be mounted on a
standard wall plate.
1. Plug the AC Adapter into the Base Unit.
2. Place the AC Adapter cord inside the
molded channel.
3. Plug one end of the short telephone cord
into the TEL LINE jack on the Base Unit.
4. Place the telephone cord inside the molded
channel on the bottom of the Base Unit.
Then plug the other end of the telephone
cord into the modular jack on the wall.
DX834
5. Place the Base Unit on the posts of the wall
plate and push down until it's firmly seated.
6. Plug the AC Adapter into a standard
230~240V AC wall outlet. Note: Do not use
an outlet controlled by a wall switch.
If you do not have a standard wall plate, you can
mount your phone directly on a wall. Before
mounting your phone, consider the following:
* Select a location away from electrical cables,
pipes or other items behind the mounting location
that could cause a hazard when inserting screws
into the wall.
* Make sure the wall material is capable of sup-
porting the weight of the Base Unit and Handset.
* Use #10 screws with anchoring devices suitable
for the wall material where the Base Unit will be
placed.
1. Insert two mounting
screws 100mm apart.
Allow about 5mm
between the wall and
screw heads for
mounting the phone.
13