Uniden DX 834 Series Operating Manual page 14

2. Plug the AC Adapter into the Base Unit
3. Place the AC Adaptor cord inside the
molded channel.
4. Plug one end of the long telephone cord
into the TEL LINE jack on the Base Unit.
5. Place the cord inside the molded channel on
the bottom of the Base Unit.
14
6. Place the Base Unit on the screws and
push down until it's firmly seated.
7. Plug the other end of the telephone line cord
into the wall jack
8. Plug the AC Adapter into a standard
230~240V AC wall outlet.
Note: Do not use an outlet controlled by
a wall switch
DX834