Uniden DX 834 Series Operating Manual page 20

All programming functions must be completed
when your phone is in the standby mode because
programming keys do not function while you are
on the phone.
Use these keys to store a number in memory.
Note: An error tone will sound and the program-
ming procedure will be canceled if more than 20
seconds elapse between each keystroke entry or
step.
1. Remove the Handset from the Base Unit.
2. Press .
The TALK/BATT LOW LED blinks.
3. Enter the number you want
to store (up to 16 digits).
4. If a pause is needed during
dialing to access a long distance
service, press
Note: The button counts as one digit.
Pressing more than once increases the
length of the pause between numbers.
5. Press again.
6. Enter the memory location (0-9).
A tone indicates that the number is stored.
20
.
If your phone is set up for Pulse dialing, you can
store a mixed mode number so that you can easily
access long distance services.
Use these keys to store a mixed mode number in
memory.
Note: An error tone will sound and the program-
ming procedure will be canceled if more
than 20 seconds elapse between each keystroke
entry or step.
1. Remove Handset from the Base Unit.
2. Press .
The TALK/BATT LOW LED blinks.
3. Enter the number
to be dialed in
pulse mode.
4. Press on the Handset.
5. Enter the number
to be dialed in
tone mode.
6. If a pause
is needed
during dialing to access a long distance
service, press
Note:The button counts as one digit.
Pressing more than once increases the
length of the pause between numbers.
7. Press again.
8. Enter the memory location (0-9).
A tone indicates that the number is stored.
.
DX834