Husqvarna 570 XP/G Workshop Manual page 33

Dismantling
!
WARNING!.
The.fuel.used.in.the.chainsaw.has.the.
following.hazardous.properties:
1..The.fluid.and.its.fumes.are.poisonous.
2..Can.cause.skin.irritation.
3..Is.highly.inflammable.
1. Remove the cylinder cover and air filter.
2. Remove the carburettor control (D) by pulling.
Disconnect switch wires (E and F). See fig. 8.
3. Unhook the throttle cable (A). See fig. 8.
4. Remove the fuel pipe (B).
5. Remove 4 bolts (G) which secure the filter holder,
carburettor and choke system.
6. Loosen the filter holder and disconnect the rear
rubber mounts (H). See fig. 9.
7. Remove the filterholder with carburettor and choke
system. See fig. 9.
CARBURETTOR
Fig. 8
Fig. 9
B
E
D
F
G
H
A
C
H
English – 33