Husqvarna 570 XP/G Workshop Manual page 25

6. Dismantle the cables (A) and (B) on the heater
switch. Loosen connection (C). See fig. 12.
7. Loosen the cable fastening on the tank.
8. Dismantle the screws (A) on the generator.
fig. 14.
Replacing.the.switch
1. Remove the switch and disconnect the cables. See
fig. 12.
2. Fit the cables on the new switch and press in the
switch.
Replacing.the.heating.element.in.the.tank.unit
1. Remove the rear hand grip insert (A). See fig. 15.
2. Remove the cable connections (C and B).
See fig. 15.
3. Fit the heating element and cable connections.
ELECTRICAL.SYSTEM
See fig. 13.
See
Fig. 12
Fig. 13
Fig. 14
B
C
A
Fig. 15
A
B
C
A
English – 25