Ring Delay; Message Length; Setting Remote Pin; Message Alert - Uniden DECT160 Owner's Manual

Ring Delay

You can set the answering machine to pick up a
call after 10sec, 20sec, 30sec or Toll Saver.
For Toll Saver, the call is answered after 10sec if
there are new messages and 30sec if there are no
new messages.
To set the ring time, use
. Press
delay option and press

Message Length

You can set the record length for incoming
messages from 1 minute or 4 minutes or set to
Announce only.
Announce only means only the OGM is played.
To set the message length use
select .
Press . Select the desired message length
option and press
or to select
. Select the desired ring
.
or to
.

Setting Remote PIN

You must set a 4 digit PIN to enable remote
access from an outside line.
To set the Remote PIN use
. Press
press .

Message Alert

To set the base to beep when there is a new
message use
Press . Select the desired On or Off option
and press

Language

To select the answering machine language, use
or to select
Press . Select
Press .
[40]
or
. Enter a 4 digit PIN and
or to select
.
.
or
to select
.
.