On the handset you want to register:
5 Press
.
6 Enter the base PIN code. Pre-set base PIN
ode is 0000.
7 Press
.
You will hear a confirmation tone when registration
is complete.
When in standby mode, the new handset number
will be displayed.
The handset will automatically be allocated with
the next available handset number.
If the registration is failed, the handset display
returns to the display before enter the registration
step.
De-register a handset
If you have more than one handset registered to
your base you can de-register a handset
registered to use.
Before registering, make sure all handsets and the
base are in standby mode.
1 On a handset not to be de-registered, press
to access the main menu.
2 Press
or
until
BS SETTINGS
cid
displayed and press
.
3 Press
or
to display
TERMINATE HS
cid
and press
.
4
is displayed. Enter your PIN code and
PIN ?
press
.
5 Press
or
to display the handset you
cid
want to de-register and press
If the handset has been registered to the base
successfully, you will hear a confirmation tone.
[28]
is
.