Connecting.the.base; And.charging.the.handset - Uniden DCT756 Owner's Manual

Connecting the Base and Charging the Handset
1. Connect.the.AC.adapter.to.the.DC IN 9V.jack.
. Connect.the.AC.adapter.to.a.wall.outlet.that.is.not.controlled.by.a.switch..
3. Place.the.handset.in.the.base.with.the.LCD.screen.facing.forward..
4. Make.sure.that.the.charge.LED.illuminates..If.the.LED.does.not.illuminate,.check.to.see.that.the.AC.adapter.
is.plugged.in.and.the.handset.makes.good.contact.with.the.base.charging.contacts..
5. Charge.your.handset.at.least.15-0.hours.before.plugging.into.the.phone.line.
Note: Use only the supplied AD-800 AC adapter with your phone.
Do not use any other AC adapter.
DCT756 DCT756
17
DCT7565 DCT7565